|
Precision PW66 66mm Wastegate & PartsPrecision Turbo 66mm CO2 Wastegate Valve w/ All Springs
Precision Turbo 66mm CO2 Wastegate Valve w/ All Springs
Part # : PTEWG66-CO2
Price : $570.78
This item will ship in 2-3 business days.
The Precision Turbo Pro-Series 66mm CO2 Wastegate is a 66mm external wastegate with v-band flange connections. The 66mm CO2-specific Pro Series wastegate is fully adjustable, and has 3 individual ports (2 on the bottom can and 1 on the top can) for the ultimate in control. Designed specifically for use with CO2-based boost control systems, the wastegate offers quicker response time, accuracy, and durability under the high pressure demands of CO2 actuation, when compared to standard wastegate designs. PTE's 66mm Pro Series external wastegate also incorporates unique, stabilizing "Precision Pins" which prevent the inlet and outlet flange from spinning.
With over 60 years of turbocharger development and racing experience, Precision Turbo takes great pride in providing the best external wastegate on the market today. Precision's PW66 Valve is designed to be a direct replacement for most manufacturers flanges. Every valve is warranted to be free from manufacturer's defect for 12 months or 12,000 miles! The PW66 is constructed from the highest grade components, inside and out. From the high temperature 347 stainless steel investment cast valve body to the Kevlar reinforced diaphragm. The investment casting process leaves you with a smooth internal surface finish for better flow and accurate boost control. A satin black anodized wastegate cap finished off the look for long lasting, low key appearance.
Note: Upper and lower banjo bolts and fittings are sold separately (part number 085-2114) Precision CO2 66mm Wastegate Features:- 347 Stainless Steel Investment Cast Valve Body
- Nickel Chromium Alloy Valve Seat
- 6061 Billet Aluminum Housing w/ Black Satin Anodizing
- V-Band Clamped Wastegate Cap for Ideal Port Positioning
- "Precision Pins" to prevent flanges from spinning
- 17-7 Precipitation Hardened Springs
- Four Individual Ports
- Compatible with most aftermarket boost controllers (manual and electronic)
Precision 66mm CO2 Wastegate Kit:- PW66 66mm Wastegate Valve Assembly
- All 5 Springs (Two Pre-Installed)
- Valve Seat
- 304 Stainless Steel Inlet V-Band Flange and Clamp (85-90 in-lbs) (Counterbored for 2-1/2" OD Tubing)
- 304 Stainless Steel Outlet V-Band Flange and Clamp (85-90 in-lbs) (Counterbored for 2-1/2" OD Tubing)
- Pair of Pressure Port Caps w/ Seal Washers (M10 x 1.0, will also accommodate 1/8 NPT)
- Instruction Manual w/ Spring Chart
Safety Note Details:
Prop 65 Warning:
Precision Turbo PW66 66mm Wastegate Spring Chart |
PSI | BAR | Springs |
0.9 | 0.06 | Natural |
1.8 | 0.12 | Yellow |
2.7 | 0.19 | Natural + Yellow |
2.9 | 0.20 | Red |
3.8 | 0.26 | Natural + Red |
6.3 | 0.43 | Green |
7.2 | 0.50 | Natural + Green |
8.1 | 0.56 | Yellow + Green |
9.0 | 0.62 | Natural + Yellow + Green |
9.2 | 0.63 | Red + Green |
10.1 | 0.70 | Natural + Red + Green |
12.8 | 0.88 | Blue |
13.7 | 0.94 | Natural + Blue |
14.6 | 1.01 | Yellow + Blue |
15.5 | 1.07 | Natural + Yellow + Blue |
15.7 | 1.08 | Red + Blue |
16.6 | 1.14 | Natural + Red + Blue |
Rotate your screen to see additional columns.
|
Limited Warranty DetailsEach Precision Turbo brand turbocharger is warranted to be free from manufacturer's defects for a Period of 12 months or 12,000 miles, whichever occurs first, from date of original invoice. Manufacturer's Warranty otherwise applies. Seller expressly disclaims all implied warranties of merchantability and/or fitness for a particular purpose.
Precision Turbo will repair or replace at its discretion any precision turbo branded product that proves defective in material or workmanship under normal installation, use and service. In the case of any warranty claim with regards to defects in material or workmanship, the product in question should be returned freight prepaid to the address shown above.
This warranty does not cover damage or failure of components due to normal wear and tear. There is no warranty on any parts used in race applications or on products that have been physically altered, improperly installed or not maintained. Seller's warranty is in lieu of all other warranties, express or implied.
|
|
|