|
GatesGates Barricade Carburetion Fuel Line Hose
Gates Barricade Carburetion Fuel Line Hose
Part # : GCHSEBARRICADE-CARB
Price : $5.15 $763.33
Gates® Barricade Carburetion Fuel Line is a low-permeation, premium hose for use on carbureted engines, PCV and EEC Systems, and for fuel return hose on fuel injection systems. Gates MPI Barricade Fuel Line is approved for use with leaded and unleaded gasoline, diesel, bio-diesel, E-85, methanol, ethanol, and gasohol fuels. Gates Carburetion Fuel Hose features a patented 5-layer Greenshield® barrier technology that keeps fuel out of the environment while delivering peak fuel efficiency.
Warning: Do not submerse in gasoline.
Caution: Do not use on pressure line on fuel injection systems or cooling system applications. Use Gates Barricade Fuel Injection Hose for Multi-Port Injection systems. Gates Barricade Fuel Hose for Carbureted System Features:- Meets SAE J30R14T1, EPA 40 CFR 1051.110 , and CARB small engine off-road requirements for low permeation (except for kink resistance)
- Textile spiral layer (two spiral) and thermoplastic barrier layer
- Moil, heat, ozone and abrasion resistant cover
- Recommended for carbureted engines in cars, light trucks, off-road vehicles and small engines
- Temperature rating: -40°F to 257°F (-40°C to 125°C)
- Available in 2', 15', 25' and 250' Lengths
Safety Note Details:
Prop 65 Warning:
Gates # |
Hose ID |
Hose OD |
Length |
Working Pressure |
27302 | 3/16" | 13/32" | 2' | 50 psi |
27303 | 1/4" | 1/2" | 2' | 50 psi |
27304 | 5/16" | 9/16" | 2' | 50 psi |
27305 | 3/8" | 5/8" | 2' | 50 psi |
27306 | 1/2" | 25/32" | 2' | 25 psi |
27312 | 3/16" | 13/32" | 25' | 50 psi |
27313 | 1/4" | 1/2" | 25' | 50 psi |
27314 | 5/16" | 9/16" | 25' | 50 psi |
27315 | 3/8" | 5/8" | 25' | 50 psi |
27316 | 1/2" | 25/32" | 25' | 25 psi |
27321 | 3/16" | 13/32" | 250' | 50 psi |
27323 | 1/4" | 1/2" | 250' | 50 psi |
27324 | 5/16" | 9/16" | 250' | 50 psi |
27325 | 3/8" | 5/8" | 250' | 50 psi |
27326 | 1/2" | 25/32" | 250' | 25 psi |
Rotate your screen to see additional columns.
|
Limited Warranty DetailsGoods are warranted to be free from defects in material or workmanship for the life of the Goods (or the published recommended replacement interval specified by Gates). Gates will replace or repair, at its option, any Goods proved defective in material or workmanship during the warranty period. This is the sole remedy for breach of warranty. Color fade and color difference is not warranted. This warranty is void if the defect is caused by improper installation, use or maintenance of the Goods, or used for racing or competition. Goods are not warranted to comply with laws that may apply to uses of the Goods not stated in related materials, e.g., use in manned or unmanned aviation or life support applications. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY DISCLAIMED. FAILURE TO REPLACE TIMING BELTS OR OTHER GATES PRODUCTS AS SPECIFIED MAY RESULT IN CATASTROPHIC ENGINE OR EQUIPMENT DAMAGE, FOR WHICH GATES DISCLAIMS ALL RESPONSIBILITY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
Some states do not allow the exclusion or limitation of incidental or consequential damages, and some states do not allow limitations on how long an implied warranty lasts, so the above limitation and exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
|
|
|