|
Heatshield Component Specific ShieldsHeatshield Header Armor Blanket
Heatshield Header Armor Blanket
Part # : HPHA
Price : $112.00 $230.00
This item will ship in 3-4 business days.
Heatshield Header Armor is a heat shield blanket intended for under hood insulation of exhaust headers. Achieve up to 40% reductions in under hood temperatures with these easy to install header wraps. Featuring an abrasion resistant exterior for long lasting performance. Installation is as simple as wrapping around the headers, forming the material by hand, and securing with the included high temperature Inconel wire. If modification is needed, you can easily trim excess material with a pair of heavy-duty scissors. No header removal necessary! Best of all, these wraps are easily removed, allowing you to maintain most manufacturer warranties.
Note: This product will smoke after initial installation, this is part of the curing process and will go away over time.
Heatshield HP Header Armor Heat Shield Blanket Features: - Withstands 1,800 Deg F continuous, 2,200 Deg F intermittent
- Abrasion Resistant
- Simple Installation
- Chemical Blocking Aluminum Layer
- Easily Modified
- Compatible with most Manufacturer Warranties
- Decreases Engine Bay Temperatures by up to 40%
- Manufactured from top quality materials, right here in the USA
Heatshield HP Header Armor Installation: - Clean - Exhaust components to be cover must degreased and cleaned to remove all chemicals and debris prior to installation, failure to do so may result in combustion.
- Mockup - We recommend making a template from paper, cardboard or poster board to prevent mis-cuts during installation. Template should cover top and sides of runners, take note of spark plug boots or wire harnesses in the vicinity as HP Header Armor and accommodate accordingly on your template (Warning: Header Armor is electrically conductive). Keep template 1/4"-1/2" oversize on all dimensions so you can fold over the ends for a finished edge. For tight bends, cut a small wedge from the aluminum portion rather than allowing it to bunch up.
- Test Fit - Cut out the template you made and test fit. If you are not happy with the results mockup a new template making the tweaks you want.
- Finalize - Once you have a template you are satisfied with, trace it onto the Heatshield armor and cut with a pair of heavy duty scissors. Test fit this piece and make any final cuts or adjustments that may be needed. Use a utility knife to trim insulation back from the 1/4" or 1/2" over sizing you used. Fold the exposed aluminum down to cover the edge of the insulation.
- Install - Now that you have your customize HP Header Armor, place the piece in the desired location. Take one of the supplied wires and form it into a "U" Shape. Use one end to pierce the outer aluminum of the armor closest to the cylinder head on one side of the exhaust pipe. Use the other end of wire to make a hole on the other side of the exhaust pipe. The two ends of wire should meet on the opposite side of the exhaust pipe. Use a pair of needle nose pliers to twist them together and tighten the wire, trim away any excess, then tuck the twisted portion under the armor with the tip towards the insulation. Repeat this process in as many locations as needed for a tight fit.
Safety Note Details:
Prop 65 Warning:
Rotate your screen to see additional columns.
|
90 Day Limited Warranty DetailsHeatshield Products, Inc.’s merchandise are warranted for 90 days from date of purchase. If during this time period these products fail prematurely due to a manufacturing defect they will be replaced without charge upon their return to Heatshield Products, Inc. accompanied with a legible copy of an original proof of purchase and complete description of the problem. Customer is responsible for any freight charges on alleged defective products to Heatshield Products, Inc.; approved warranty replacement products will in turn be shipped without freight charge to customer.
Heatshield Products, Inc. is not responsible for any miss application and or misuse of products. This warranty is null and void if the products have been misused, misapplied or are not a correct application in accordance to the products advertised thermal parameters or if they have been damaged from malfunctioning other components of the vehicle or other damage caused by external factors.
THIS WARRANTY DOES NOT INCLUDE LABOR OR COVER THE COST OF ANY ADDITIONAL COMPONENTS AND LABOR TO REPLACE THESE COMPONENTS.
The foregoing states Heatshield Products, Inc.’s’ entire and exclusive liability for any claim, including claims arising out of a breach of any implied warranties, in connection with the sale of the thermal insulation materials hereunder, and shall in no event be liable for any special or consequential damages what so ever.
Heatshield Products, Inc. shall not be liable for any and all consequential damages occasioned by the breach of any written or implied warranty pertaining to this sale in excess of the purchase price of the product sold.
This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Legible copy of original proof of purchase must accompany any claim against limited warranty.
|
|
|