S&B's Precision II Cleaning & Oiling Kit features a re-engineered oil applicator for an easier and more precise air filter cleaning experience. Now with double the oil and 63% more cleaner, this kit has everything you need to clean most air filters three times. Everything comes in a convenient, reusable box so you can keep the kit neat and organized in between cleanings.

These Precision Cleaning & Oiling Kits allow vehicle owners to properly maintain their high performance air filters by precisely applying the correct amount of oil. Now including a trigger spray cleaning solution that makes applying generous amounts of cleaner quick and easy. The clearly marked bottles and easy-to-use oil applicator allow the user to measure and apply the proper amount of oil for each application. The revamped oil applicator now can hold all the oil needed for an oiling session, users will no longer need to stop and refill the bottle half way through the process. S&B has conducted extensive testing with the Precision Cleaning Kit to ensure that it can be used on most high performance filters available today. With the Precision II Cleaning and Oiling Kit you can quickly and accurately restore your high performance air filter to like-new condition.

This kit includes:

• 32 ounce trigger spray bottle of cleaning solution
• Your choice of a 16 ounce squeeze bottle of red OR blue oil
• Re-engineered precision oil applicator
• Cleaning and oiling instructions
• Reusable storage box
  

Clean your filter in just 3 easy steps:

1. Remove and clean the filter from your vehicle:
   Clean the sealing area of your filter and filter housing with a clean soft clean rag. Do not start your vehicle without a filter installed. Shake or lightly tap the filter on a hard surface to remove and loosen large particles and debris. A soft brush may be used to loosen large pieces of debris or bugs. Be sure to note which side of the filter has trapped the dirt. Use S&B's Filter Cleaner to clean the filter. Let soak for 10 minutes and then rinse with low pressure tap water. Allow filter to air dry.



2. Fill the applicator bottle with the correct amount of oil:
   Rotate the bottle of oil with the cap facing downward. Make note of your starting point on the measurement gauge to make sure that the proper amount of oil is dispensed. When re-oiling a filter, it is critical to place the oil on the side where the dirt will accumulate. Using the applicator bottle, place a drop of oil on the peak of each pleat where it meets urethane (rubber).



3. Allow the oil to bleed for 20-30 minutes, then apply remaining oil to any white areas and re-install your air filter:
   After allowing the oil to bleed for 20-30 minutes, inspect the filter for any white areas where the oil did not cover. With the remaining oil in the applicator, apply a small amount of oil to those white areas. Apply the correct amount of oil (+ 5 grams) is critical to proper performance of the filter. DO NOT over oil your filter.