• TiAL Blow Off Valve Springs (Q / QR / QRJ)

TiAL Blow Off Valve Springs (Q / QR / QRJ)

(0)No Reviews yet

TiAL® Blow Off Valve Springs are designed to work in all of their blow off valve models including the BV 50mm, Alpha Q, Q, QR, and QRJ valves. You should select the BOV spring pressure rating based on your engine's vacuum reading at idle, once the engine has reached operating temperature. However, the pressure ratings will vary depending on the model blow off valve you have, so please reference the chart below to ensure you are purchasing the correct spring for your application. The green spring should only be used on supercharged vehicles, on quick spooling turbos the valve can actually open briefly before raching the manifold, dumping the boost. TiAL® Blow Off Valves need a 1/4" inner diameter source that is direct to the manifold, smaller lines and additional T-fittings can cause delays in response time.

Q and QR Spring Rates
Spring ColorSpring RateUse for Engine Vacuum Reading
Green2 psi (0.14 bar)SUPERCHARGER ONLY
Black6 psi (0.41 bar)-8 to -11 inHg
White8 psi (0.55 bar)-12 to -15 inHg
Plain10 psi (0.69 bar)-16 to -19 inHg
Yellow11 psi (0.76 bar)-20 to -21 inHg
Brown12 psi (0.83 bar)-22 to -23 inHg
QRJ Spring Rates
Spring ColorSpring RateUse for Engine Vacuum Reading
Pink1.5 psi (0.10 bar)SUPERCHARGER
Green3 psi (0.21 bar)TURBOCHARGER

Ratings & Reviews

No reviews available

Be the first to Write a Review