The Redback Silicone hose cutting machine was developed due to the issue of trimming or cutting silicone hose sections, after all attempts to use conventional methods there had to be something better than a knife, clamp or drop saw. This machine cuts a 3" internal diameter section within 40 seconds of starting the procedure. Setting the die size and height takes no more than 1 minute and the cut is quick, clean, & safe.
The kit comes with 11 stock hose cutting sizes: 1.25”, 1.5”, 1.75”, 2’, 2.25”, 2.5”, 2.75”, 3”, 3.5” and 4”. 1” Internal diameter hose is cut on the main bottom shaft without the need for an internal acrylic die. You can cut in between sizes on these dies as well as long as the hose diameter is not too large (e.g. you can cut 3 1/8" hose with the 3" die, etc.). You will very much want to experience this efficient and innovative tool for yourself.
Safety Note Details:The blades that this machine uses are incredibly sharp, thus extreme caution should be used and operation by minors is not encouraged.
Prop 65 Warning:
Rotate your screen to see additional columns.