Silicone hose is NOT FOR USE IN FUEL OR OIL APPLICATIONS.

This item is priced and SOLD BY THE FOOT --- so buy as many continuous feet as you need! The quantity you choose will be the length of hose you receive.

Verocious Motorsports high quality Platinum Cured Silicone Vacuum Hose is made right here in the USA --- buy proud buy American!

Designed for vacuum sensing and low pressure fluid applications requiring ozone, water, weather, and extreme temperature resistance. Verocious Vacuum Hose is THE CHOICE to replace those old black rubberhoses that were originally installed on your car when you bought it and are now dried out and leaking.

Is your engine running rough? Over time, those OEM hoses can develop small pin holes and cracks that can cause the hoses to leak resulting in a loss of vehicle performance and response. By replacing those old vacuum lines with Verocious Vacuum Hose you can gain 1-4 cm of Hg vacuum pressure and stop problems like Surging Idle while increasing your low RPM boost response.

With typical operating temperatures form -65 degree F to 400 degree F, Verocious Vacuum Hose is the perfect candidate to replace your brittle or worn OEM Vacuum, Emission Control, or Windshield Wiper Hose.

Manufactured in the USA from a proprietary formulation that has been rigorously tested and is far superior to most other Vacuum Hose currently available for two very important reasons - the wall thickness and the platinum curing process.

Heavy Duty Wall Thickness:

Vacuum Hoses are sized by the Inside Diameter (ID), but most manufacturers don't publish the wall thickness of their hose. Since a thicker wall means more material and therefore higher costs, most manufacturers keep their wall construction to the barest minimum. As a result, there is a huge variation in wall thicknesses from one manufacturer to another with absolutely no standard wall. Our Heavy Duty construction ensures that your hose won't collapse under even the most extreme vacuum pressure.

Platinum Cured:

Not all Silicone Hoses are created equal. In it's unfinished state silicone looks and feels like Silly Putty. In fact, that's exactly what Silly Putty is; uncured silicone rubber. Since it first became commercially available in the 1940's, silicone rubber has typically used organic peroxide catalysts as the curing agent to achieve vulcanization. More recent innovations in organic chemistry have resulted in the development of silicone rubbers that can be curd by the use of platinum compounds. While they are more expensive than their conventional peroxide cured counterparts, platinum cured silicone formulations typically exhibit significantly improved physical properties such as tensile and elongation as well as higher tear strength and abrasion resistance. An added benefit to you is that our Platinum Cured hoses will be snappier and much more kink resistant than conventional hoses.